R2-D2 CS:L Aluminum Skin V1 (standard utility arm cut out, will clear current utility arm version, may interfere with older arms) This skin is laser cut and rolled in 4 pieces. Front and back, inside and outside pieces. The skin will ship continental US via Fedex Ground service, and Priority Mail for all locations outside the US, and other US destinations.
R2-D2 CS:R Aluminum Skin. This skin is laser cut and rolled in 4 pieces. Front and back, inside and outside pieces. The skin will ship continental US via Fedex Ground service, and Priority Mail for all locations outside the US, and other US destinations.
R2-D2 Dome Alignment Bullet set of 6. These are threaded 10-32 x .25" diameter, giving you more precise adjustment than 10-24 threads. Drill your dome ring to just slip over the bullets, add a slight chamfer, and these will enable quick and easier alignment and removal of dome. Your current screws may be 10-24, so be sure and check.
There is an option to also order stainless screws and nuts that fit the Rockler bearings and dome bullets. As the builder, you can choose to double nut the bullets or not. If double nutting, you need 18 nuts, if not, choose 12.
This is a replica of one of the real R2 dome toppers. It happens to be the one I took photos of when I was around this particular R2 when Don Bies had it at Steve Sansweet's Rancho Obi-Wan for a photo shoot years ago. Of all the toppers I've seen, it's the most interesting since it has a beveled edge instead of just being rounded over.
It's aluminum and made in two pieces, so finishing is easy. It fits into the hole inside Daren's alum dome, and is held with an included 1/4" ss washer and ss 1/4-28 nut.
A second run of these will begin shipping Monday 2/13/18.
These are out of stock until about 3/1. You may place a back order, or watch the thread for an update.
Use this item to purchase only 1 HP Slip Ring / Servo Mount.
Kid-proof Holo Projector slip ring mount designed to attach to the back of a BobC Holo Projector mount. The turned aluminum adapter has an integrated 6 wire slip ring (included) and has a place to mount either a REON or FILTHY LED board. For the FILTHY LED board there is an option to purchase an acrylic adapter. You will also receive 4 screws and standoffs you will use to attach to BobC's HP mounting rings, and two extension springs for the servo linkages. Though shown for reference, the servos, REON or FILTHY LED board are not included. The servo mount is designed to hold two micro-servos, and includes holes for a servo with either 2 or 4 screws. In the options, you need to select the number of screws your servos will need.
Use this item to purchase only 2 HP Slip Ring / Servo Mounts.
Use this item to purchase only 3 HP Slip Ring / Servo Mounts.
101 Marshall Creek Rd.
Roanoke, TX 76262
Copyright © Rebelscum 2018