| home | products | checkout | contact  
  PRODUCTS      



Shopping cart  Shopping cart
0 Product(s) in cart
Total $0.00
» Checkout

 
 
Unopened Animated Maquette (Promo)
Price: $100.00

 
Unopened Minibust
Price: $50.00
Out of Stock

 
Unopened Maquette
Price: $65.00

 
Unopened Maquette (Promo)
Price: $100.00

 
Unopened Animated Maquette (Promo)
Price: $100.00

 
Unopened Minibust
Price: $25.00

 
Unopened Minibust (Promo)
Price: $75.00

Plaque Stand MR - Regular x2


At long last, these stands are now sold out. No more will be available.

This a Regular Size Master Replicas plaque stand kindly made for us by Master Replicas so we could make them available to the prop replica community. This plaque size is 1.5"h x 3.5"w. Stands include double stick tape on them and are individually tissue wrapped and placed in a plastic bag for protection. For reference, here is a photo of the back side of the stands.

Note, these are sold in pairs, so when you order them, make sure you are aware you will get 2x the quantity you enter.

Shipping via First Class for Domestic US, Air Mail for outside the US.

Price: $9.00
Out of Stock

Plaque Stand MR - Tall Signature x 1


Postage costs went up for international shipments 2/5/16. Ordering is on hold pending changes for this.

This a Tall Signature Size Master Replicas plaque stand kindly made for us by Master Replicas back in the day so we could make them available to the collecting community. This plaque size is 2.5"h x 3.5"w and fits both the original MR "Chrome" signature* and later matte finish plaques. Stands include double stick tape on them and are individually tissue wrapped and placed in a plastic bag for protection. For reference, here is a photo of the back side of the stands.

* Note: There have been reports the original chrome plaques sometimes don't fit perfectly. This appears to be a combination of several things. The plaques may not all be the exact same dimension, the plaque holder inset corners are a little rounded and the plaque has sharp corners. Some customers have trimmed the indentation in the plaque holder, others have used double stick foam tape to attach the plaque, and at least one person has filed the corners of their plaque.

Shipping via First Class for Domestic US, Air Mail for outside the US.

Price: $4.95
Out of Stock

R2-D2 CS:R
1 of 2

R2-D2 CS:R Aluminum Skin. This skin is very nicely laser cut and rolled in 4 pieces. The rolling is complete, and will roll all the small panels as well. Front and back, inside and outside pieces. The skin will ship in a custom foam cradle and custom box to continental US addresses via Fedex Ground service, and Priority Mail for all locations outside the U.S., and other U.S. destinations.

Please enter your Astromech display name in the comments.

If you use sbcglobal for email, you will not receive communications from the store.

 

Price: $295.00

R2-D2 CS:Rh
1 of 2

R2-D2 CS:Rh Aluminum Skin version for the Holme Made frame. This skin is very nicely laser cut and rolled in 4 pieces. The rolling is complete, and will roll all the small panels as well. Front and back, inside and outside pieces. The skin will ship in a custom foam cradle and custom box to continental US addresses via Fedex Ground service, and Priority Mail for all locations outside the U.S., and other U.S. destinations.

Please enter your Astromech display name in the comments.

If you use sbcglobal for email, you will not receive communications from the store.

 

Price: $295.00

R2-D2 CS:L
1 of 2

R2-D2 CS:L Aluminum Skin. This skin is very nicely laser cut and rolled in 4 pieces. The rolling is complete, and will roll all the small panels as well. Front and back, inside and outside pieces. The skin will ship in a custom foam cradle and custom box to continental US addresses via Fedex Ground service, and Priority Mail for all locations outside the U.S., and other U.S. destinations.

Please enter your Astromech display name in the comments.

If you use sbcglobal for email, you will not receive communications from the store.
 
 
Price: $275.00

R2-D2 Wide-Mouth Holo-Projector
1 of 13

These Holo-Projectors are spec in the visible part, but have a dramatically larger rear access opening, and are very large inside, with two different "steps" you can use to mount electronics. They come with 2 sets of laser cut acrylics you can customize for your application. A lens and retaining ring as installed in each HP.

 

 

 

 

Price: $100.00

R2-D2 Dome Bullets
1 of 2

R2-D2 Dome Alignment Bullet set of 6. These are threaded 10-32 x .25" diameter, giving you more precise adjustment than 10-24 threads. Drill your dome ring to just slip over the bullets, add a slight chamfer, and these will enable quick and easier alignment and removal of dome. Your current screws may be 10-24, so be sure and check.

There is an option to also order stainless screws and nuts that fit the Rockler bearings and dome bullets. As the builder, you can choose to double nut the bullets or not. If double nutting, you need 18 nuts, if not, choose 12.

Screws No Screws
Qty 6 of 10-32 x 1.25" SS Flat Head Screws (+$3.00)
Nuts No Nuts
Qty 12 of 10-32 SS Hex Nuts (+$3.50)
Qty 18 of 10-32 SS Hex Nuts (+$5.00)
Price: $25.00

R2-D2 Dome Topper
1 of 5

This is a replica of one of the real R2 dome toppers. It happens to be the one I took photos of when I was around this particular R2 when Don Bies had it at Steve Sansweet's Rancho Obi-Wan for a photo shoot years ago. Of all the toppers I've seen, it's the most interesting since it has a beveled edge instead of just being rounded over.

It's aluminum and made in two pieces, so finishing is easy. It fits into the hole inside Daren's alum dome, and is held with an included 1/4" ss washer and ss 1/4-28 nut.

 

Price: $20.00

« | 1 | 2 | 3 | 4 | 5 | 6 | »

Rebelscum
101 Marshall Creek Rd.
Roanoke, TX 76262
(214) 207-7355

 

     
 

Copyright © Rebelscum 2020