| home | products | checkout | contact  
  PRODUCTS      



Shopping cart  Shopping cart
0 Product(s) in cart
Total $0.00
» Checkout

 
R2-D2 CS:Rh
1 of 2

R2-D2 CS:Rh Aluminum Skin version for the Holme Made frame. This skin is very nicely laser cut and rolled in 4 pieces. The rolling is complete, and will roll all the small panels as well. Front and back, inside and outside pieces. The skin will ship in a custom foam cradle and custom box to continental US addresses via Fedex Ground service, and Priority Mail for all locations outside the U.S., and other U.S. destinations.

Please enter your Astromech display name in the comments.

If you use sbcglobal for email, you will not receive communications from the store.

 

Price: $338.00

R2-D2 Dome Bullets
1 of 2

R2-D2 Dome Alignment Bullet set of 6. These are threaded 10-32 x .25" diameter, giving you more precise adjustment than 10-24 threads. Drill your dome ring to just slip over the bullets, add a slight chamfer, and these will enable quick and easier alignment and removal of dome. Your current screws may be 10-24, so be sure and check.

There is an option to also order stainless screws and nuts that fit the Rockler bearings and dome bullets. As the builder, you can choose to double nut the bullets or not. If double nutting, you need 18 nuts, if not, choose 12.

Screws No Screws
Qty 6 of 10-32 x 1.25" SS Flat Head Screws (+$3.00)
Nuts No Nuts
Qty 12 of 10-32 SS Hex Nuts (+$3.50)
Qty 18 of 10-32 SS Hex Nuts (+$5.00)
Price: $30.00

R2-D2 Dome Topper
1 of 5

This is a replica of one of the real R2 dome toppers. It happens to be the one I took photos of when I was around this particular R2 when Don Bies had it at Steve Sansweet's Rancho Obi-Wan for a photo shoot years ago. Of all the toppers I've seen, it's the most interesting since it has a beveled edge instead of just being rounded over.

It's aluminum and made in two pieces, so finishing is easy. It fits into the hole inside Daren's alum dome, and is held with an included 1/4" ss washer and ss 1/4-28 nut.

Price: $20.00
Out of Stock

R2-D2 HP Slip Ring Mount BobC Qty 1 Only
1 of 4

BobC Version. Use this item to purchase only 1 HP Slip Ring / Servo Mount.

Kid-proof Holo Projector slip ring mount designed to attach to the back of a Holo Projector mount. The turned aluminum adapter has an integrated 6 wire slip ring (included) and has a place to mount either a REON or FILTHY LED board. For the FILTHY LED board there is an option to purchase an acrylic adapter. You will also receive 4 screws and standoffs you will use to attach to BobC's HP mounting rings, and two extension springs for the servo linkages. Though shown for reference, the servos, REON or FILTHY LED board are not included. The servo mount is designed to hold two micro-servos, and includes holes for a servo with either 2 or 4 screws. In the options, you need to select the number of screws your servos will need.

Please read me -> http://www.rebelscum.com/kidproof.asp

Servo Screws 1 4 screws
8 screws (+$1.00)
Filthy Adapter 1 No adapter
Adapter for Filthy LED (+$1.00)
Price: $105.00

R2-D2 HP Slip Ring Mount BobC Qty 3 Only
1 of 4

BobC Version. Use this item to purchase only 3 HP Slip Ring / Servo Mounts at a $5.00 discount.

Kid-proof Holo Projector slip ring mount designed to attach to the back of a BobC Holo Projector mount. The turned aluminum adapter has an integrated 6 wire slip ring (included) and has a place to mount either a REON or FILTHY LED board. For the FILTHY LED board there is an option to purchase an acrylic adapter. You will also receive 4 screws and standoffs you will use to attach to BobC's HP mounting rings, and two extension springs for the servo linkages. Though shown for reference, the servos, REON or FILTHY LED board are not included. The servo mount is designed to hold two micro-servos, and includes holes for a servo with either 2 or 4 screws. In the options, you need to select the number of screws your servos will need.

Please read me -> http://www.rebelscum.com/kidproof.asp

Servo Screws 3 4 screws
8 screws (+$3.00)
Filthy Adapter 3 No adapter
Adapter for Filthy LED (+$3.00)
Price: $290.00

R2-D2 HP Slip Ring Mount Dave Shaw Qty 1 Only
1 of 4

Dave Shaw Version. Use this item to purchase only 1 HP Slip Ring / Servo Mount.

Kid-proof Holo Projector slip ring mount designed to attach to the back of a Holo Projector mount. The turned aluminum adapter has an integrated 6 wire slip ring (included) and has a place to mount either a REON or FILTHY LED board. For the FILTHY LED board there is an option to purchase an acrylic adapter. You will also receive 4 screws and standoffs you will use to attach to BobC's HP mounting rings, and two extension springs for the servo linkages. Though shown for reference, the servos, REON or FILTHY LED board are not included. The servo mount is designed to hold two micro-servos, and includes holes for a servo with either 2 or 4 screws. In the options, you need to select the number of screws your servos will need.

Please read me -> http://www.rebelscum.com/kidproof.asp

Servo Screws 1 4 screws
8 screws (+$1.00)
Filthy Adapter 1 No adapter
Adapter for Filthy LED (+$1.00)
Price: $105.00

R2-D2 HP Slip Ring Mount Dave Shaw Qty 3 Only
1 of 4

Dave Shaw Version.  Use this item to purchase only 3 HP Slip Ring / Servo Mounts at a $5.00 discount.

Kid-proof Holo Projector slip ring mount designed to attach to the back of a BobC Holo Projector mount. The turned aluminum adapter has an integrated 6 wire slip ring (included) and has a place to mount either a REON or FILTHY LED board. For the FILTHY LED board there is an option to purchase an acrylic adapter. You will also receive 4 screws and standoffs you will use to attach to BobC's HP mounting rings, and two extension springs for the servo linkages. Though shown for reference, the servos, REON or FILTHY LED board are not included. The servo mount is designed to hold two micro-servos, and includes holes for a servo with either 2 or 4 screws. In the options, you need to select the number of screws your servos will need.

Please read me -> http://www.rebelscum.com/kidproof.asp

Servo Screws 3 4 screws
8 screws (+$3.00)
Filthy Adapter 3 No adapter
Adapter for Filthy LED (+$3.00)
Price: $290.00

R2-D2 HP Slip Ring Mount Jason (Pwrsrce) Long Qty 1 Only
1 of 4

Jason (Pwrsrce) Version - Long Threads. Use this item to purchase only 1 HP Slip Ring / Servo Mount.

This version has about 1/4" of threads that screw into the back of the HP. If you have less threads, you want the Jason-Short version.

Kid-proof Holo Projector slip ring mount designed to attach to the back of a Holo Projector mount. The turned aluminum adapter has an integrated 6 wire slip ring (included) and has a place to mount either a REON or FILTHY LED board. For the FILTHY LED board there is an option to purchase an acrylic adapter. You will also receive 4 screws and standoffs you will use to attach to BobC's HP mounting rings, and two extension springs for the servo linkages. Though shown for reference, the servos, REON or FILTHY LED board are not included. The servo mount is designed to hold two micro-servos, and includes holes for a servo with either 2 or 4 screws. In the options, you need to select the number of screws your servos will need.

Please read me -> http://www.rebelscum.com/kidproof.asp

Servo Screws 1 4 screws
8 screws (+$1.00)
Filthy Adapter 1 No adapter
Adapter for Filthy LED (+$1.00)
Price: $105.00

R2-D2 HP Slip Ring Mount Jason (Pwrsrce) Long Qty 3 Only
1 of 4

Jason (Pwrsrce) Version - Long Threads.  Use this item to purchase only 3 HP Slip Ring / Servo Mounts at a $5.00 discount.

This version has about 1/4" of threads that screw into the back of the HP. If you have less threads, you want the Jason-Short version.

Kid-proof Holo Projector slip ring mount designed to attach to the back of a BobC Holo Projector mount. The turned aluminum adapter has an integrated 6 wire slip ring (included) and has a place to mount either a REON or FILTHY LED board. For the FILTHY LED board there is an option to purchase an acrylic adapter. You will also receive 4 screws and standoffs you will use to attach to BobC's HP mounting rings, and two extension springs for the servo linkages. Though shown for reference, the servos, REON or FILTHY LED board are not included. The servo mount is designed to hold two micro-servos, and includes holes for a servo with either 2 or 4 screws. In the options, you need to select the number of screws your servos will need.
 
Servo Screws 3 4 screws
8 screws (+$3.00)
Filthy Adapter 3 No adapter
Adapter for Filthy LED (+$3.00)
Price: $290.00

R2-D2 HP Slip Ring Mount Jason (Pwrsrce) Short Qty 1 Only
1 of 4

Jason (Pwrsrce) Version - Short Threads. Use this item to purchase only 1 HP Slip Ring / Servo Mount.

This version has about 1/8" of threads that screw into the back of the HP. If you have more threads, you want the Jason-Long version.

Kid-proof Holo Projector slip ring mount designed to attach to the back of a Holo Projector mount. The turned aluminum adapter has an integrated 6 wire slip ring (included) and has a place to mount either a REON or FILTHY LED board. For the FILTHY LED board there is an option to purchase an acrylic adapter. You will also receive 4 screws and standoffs you will use to attach to BobC's HP mounting rings, and two extension springs for the servo linkages. Though shown for reference, the servos, REON or FILTHY LED board are not included. The servo mount is designed to hold two micro-servos, and includes holes for a servo with either 2 or 4 screws. In the options, you need to select the number of screws your servos will need.

Please read me -> http://www.rebelscum.com/kidproof.asp

Servo Screws 1 4 screws
8 screws (+$1.00)
Filthy Adapter 1 No adapter
Adapter for Filthy LED (+$1.00)
Price: $105.00

R2-D2 HP Slip Ring Mount Jason (Pwrsrce) Short Qty 3 Only
1 of 4

Jason (Pwrsrce) Version - Short Threads. Use this item to purchase only 3 HP Slip Ring / Servo Mounts at a $5.00 discount.

This version has about 1/8" of threads that screw into the back of the HP. If you have more threads, you want the Jason-Long version.

Kid-proof Holo Projector slip ring mount designed to attach to the back of a BobC Holo Projector mount. The turned aluminum adapter has an integrated 6 wire slip ring (included) and has a place to mount either a REON or FILTHY LED board. For the FILTHY LED board there is an option to purchase an acrylic adapter. You will also receive 4 screws and standoffs you will use to attach to BobC's HP mounting rings, and two extension springs for the servo linkages. Though shown for reference, the servos, REON or FILTHY LED board are not included. The servo mount is designed to hold two micro-servos, and includes holes for a servo with either 2 or 4 screws. In the options, you need to select the number of screws your servos will need.

Please read me -> http://www.rebelscum.com/kidproof.asp

Servo Screws 3 4 screws
8 screws (+$3.00)
Filthy Adapter 3 No adapter
Adapter for Filthy LED (+$3.00)
Price: $290.00

« | 1 | 2 | 3 | 4 | 5 | 6 | Next »

Rebelscum
101 Marshall Creek Rd.
Roanoke, TX 76262
(214) 207-7355

 

     
 

Copyright © Rebelscum 2018